leveling the 2011 lancer headlights

By all means not going to blind ppl in the eye but the low beam on lancer's r quite low..

any1 hav ideas how to adjust them? I think I know where it is but the philip screws on the headlight compartment got a white plastic covering that not enabling me to turn it..

any1 got any ideas??

i tried to adjust my fogs , lets just say i havnt turned them on since......

There are three screws at the back of the headlight. One adjusts left/right and is located between the high/low beam. There are two to adjust up/down on the outside of the low beam. It's a little tricky to get to and takes a lot of turning just to move it a little bit. I believe it's a 10mm. I should have a pic somewhere, otherwise I can snap one this weekend for you. I have a spare set of headlights sitting in my room ... retrofit project #3 (after the tail lights retrofit).

Juice wrote:There are three screws at the back of the headlight. One adjusts left/right and is located between the high/low beam. There are two to adjust up/down on the outside of the low beam. It's a little tricky to get to and takes a lot of turning just to move it a little bit. I believe it's a 10mm. I should have a pic somewhere, otherwise I can snap one this weekend for you. I have a spare set of headlights sitting in my room ... retrofit project #3 (after the tail lights retrofit).

I think I mistake the spot for somewhere else but it would b great if you can do that! Thanx Juice

Oh ya, they're capped. When I did my retrofit I left them uncapped so I could adjust them. :( Stupid Mitsu ... gonna be an uber late night at work, hopefully I remember to snap pics tomorrow.

Looks similar on both sides, just the headlight connectors are slightly different.
I found the one top cap tough to get out, but you should be able to adjust the tilt with just the lower leveler.