Jfrzy's 4th Gen Altima Sedan
+15
Zero
twista
l8er
maxima_tyler
BrianV
Evolutional16
Yuriy
awdaltima
Hydrolikz
Nemex6
jmontenegro
Nightwingii
Infamous
just G
jfrzy
19 posters
Page 3 of 4
Page 3 of 4 • 1, 2, 3, 4
Re: Jfrzy's 4th Gen Altima Sedan
Looks good! Keep it up!
awdaltima- TTS Rookie
- Join date : 2011-06-24
Posts : 36
maxima_tyler- TTS VIP
- Location : Sauga
Age : 33
Join date : 2011-09-28
Posts : 640
Re: Jfrzy's 4th Gen Altima Sedan
Lol for shits and gigs I threw this on. It'll be for shows and fun days , and matches the black and teal theme I have going.
jfrzy- TTS Rookie
- Location : Burlington, ON
Age : 35
Join date : 2012-06-05
Posts : 87
Re: Jfrzy's 4th Gen Altima Sedan
Lolz, it'll definately stand out. Did you wrap the trim yourself?
Hydrolikz- TTS VP
- Location : Low To The Ground
Age : 111
Join date : 2009-09-26
Posts : 4272
Re: Jfrzy's 4th Gen Altima Sedan
Yup, the 3M cf vinyl is really easy to work with. It just takes patience if you want it to turn out nicely.
jfrzy- TTS Rookie
- Location : Burlington, ON
Age : 35
Join date : 2012-06-05
Posts : 87
Re: Jfrzy's 4th Gen Altima Sedan
Lol at first glance i though you screwed a dildo onto your shifter... upon further inspection, definitely not haha
that vinly wrap though.. that looks professionally done man. i can spot any creases in the photos youve posted. nice work
that vinly wrap though.. that looks professionally done man. i can spot any creases in the photos youve posted. nice work
maxima_tyler- TTS VIP
- Location : Sauga
Age : 33
Join date : 2011-09-28
Posts : 640
Re: Jfrzy's 4th Gen Altima Sedan
Thanks! I really like the effect simple cf vinyl has on my interior. Def gonna wrap more of my trim pieces.
jfrzy- TTS Rookie
- Location : Burlington, ON
Age : 35
Join date : 2012-06-05
Posts : 87
Re: Jfrzy's 4th Gen Altima Sedan
At the same time I installed my double din HU, I also installed a JL 8W7. It fires though an opening when the armrest of my rear bench is flipped down, custom box with the sound directed straight through the opening. I'm still looking for a place that can properly design a plexi plate to cover the opening (with the Nissan emblem cut out), but here's what it looks like for now.
jfrzy- TTS Rookie
- Location : Burlington, ON
Age : 35
Join date : 2012-06-05
Posts : 87
Re: Jfrzy's 4th Gen Altima Sedan
Nice set-up!
Hydrolikz- TTS VP
- Location : Low To The Ground
Age : 111
Join date : 2009-09-26
Posts : 4272
Re: Jfrzy's 4th Gen Altima Sedan
Lol thats pretty badass man. i used to have lights like that in my old max. cool feature.
love a good audio set-up
love a good audio set-up
maxima_tyler- TTS VIP
- Location : Sauga
Age : 33
Join date : 2011-09-28
Posts : 640
Re: Jfrzy's 4th Gen Altima Sedan
Front bumper is finally being painted, hopefully done soon. I also re-did a portion of my exhaust, pretty much the whole midpipe. It used to be 2.5" all the way back, it is now 3" with a new resonator eliminating the drone I had before. The main reason I went to 3" piping wasn't for sound, though it does sound better now, but it's to prep for the UpRev tune I'll be getting. 3" piping just yields the best results for performance. Also installed my Racingline FSB and waiting on my Racingline RSB and end links.
I also recently received my intake manifold spacers and VIAS block-off plates, still need to order an underdrive pulley. Once all that is installed it will be time for a tune that will hopefully put me at 300+ fwhp. Puts out around the 255 fwhp mark from factory.
I also recently received my intake manifold spacers and VIAS block-off plates, still need to order an underdrive pulley. Once all that is installed it will be time for a tune that will hopefully put me at 300+ fwhp. Puts out around the 255 fwhp mark from factory.
jfrzy- TTS Rookie
- Location : Burlington, ON
Age : 35
Join date : 2012-06-05
Posts : 87
Re: Jfrzy's 4th Gen Altima Sedan
255whp from factory? Dyno proven, or manufacture claims?
Hydrolikz- TTS VP
- Location : Low To The Ground
Age : 111
Join date : 2009-09-26
Posts : 4272
Re: Jfrzy's 4th Gen Altima Sedan
And is APH doing the uorev tune for you? Are you going with Osirus?
Hydrolikz- TTS VP
- Location : Low To The Ground
Age : 111
Join date : 2009-09-26
Posts : 4272
Re: Jfrzy's 4th Gen Altima Sedan
Dyno proven by users on NissanClub. Another user on the board is running a similar setup to what I've done, and with just intake, exhaust and UpRev tune, he's surpassed the 300whp mark already.
Obviously every engine will yield different results, but it gives me a benchmark for what to expect. I've got one of the best intakes for the 4th gen (K&N w/ heat shield), custom exhaust to allow for maximum air flow, and those spacers/plates still to install. That member on NissanClub installed his spacers/plates after his initial tune, so not sure what kind of increase can be expected irl. I'm waiting until I have all the bolt-ons before I get it tuned. And yes, will be going with Osiris through APH. $650 for a tune, not bad.
Also waiting on word from a couple manufacturers on cams and headers for the 4th gen 3.5. There are a few of us on NissanClub waiting , so we'll see what cost is once those are finalized and then I'll have to get a retune.
Obviously every engine will yield different results, but it gives me a benchmark for what to expect. I've got one of the best intakes for the 4th gen (K&N w/ heat shield), custom exhaust to allow for maximum air flow, and those spacers/plates still to install. That member on NissanClub installed his spacers/plates after his initial tune, so not sure what kind of increase can be expected irl. I'm waiting until I have all the bolt-ons before I get it tuned. And yes, will be going with Osiris through APH. $650 for a tune, not bad.
Also waiting on word from a couple manufacturers on cams and headers for the 4th gen 3.5. There are a few of us on NissanClub waiting , so we'll see what cost is once those are finalized and then I'll have to get a retune.
jfrzy- TTS Rookie
- Location : Burlington, ON
Age : 35
Join date : 2012-06-05
Posts : 87
Re: Jfrzy's 4th Gen Altima Sedan
Thats pretty good for N/A without Cams, I would like to see what it puts out with headers+cams and all the bolt ons.
Hydrolikz- TTS VP
- Location : Low To The Ground
Age : 111
Join date : 2009-09-26
Posts : 4272
Re: Jfrzy's 4th Gen Altima Sedan
Picked up my bumper from paint today. It looks awesome; sucks that it's almost winter but I may mount it later just to enjoy it for a couple of weeks. Maybe the TTS shoot with AMF will be soon and I can have it on for that.
jfrzy- TTS Rookie
- Location : Burlington, ON
Age : 35
Join date : 2012-06-05
Posts : 87
Re: Jfrzy's 4th Gen Altima Sedan
Are you going to winter drive it?
Hydrolikz- TTS VP
- Location : Low To The Ground
Age : 111
Join date : 2009-09-26
Posts : 4272
Re: Jfrzy's 4th Gen Altima Sedan
Nah, it's only made out of polymer infused fibreglass, and I don't want to crack it before getting to enjoy it in the summer. I have the stock bumper so no big deal. I do want to put it on for a couple weeks just to see how it looks though.
jfrzy- TTS Rookie
- Location : Burlington, ON
Age : 35
Join date : 2012-06-05
Posts : 87
Re: Jfrzy's 4th Gen Altima Sedan
This is the bumper. I need to fix the Nissan emblem, it's crooked fml.
I went to mount it and realized I still need to drill the mounting holes. So I may just leave it until spring and focus on performance mods for now.
I went to mount it and realized I still need to drill the mounting holes. So I may just leave it until spring and focus on performance mods for now.
jfrzy- TTS Rookie
- Location : Burlington, ON
Age : 35
Join date : 2012-06-05
Posts : 87
Re: Jfrzy's 4th Gen Altima Sedan
Looking good bro. Cant wait to see the final look!
l8er- TTS Rookie
- Location : Richmond Hill
Age : 32
Join date : 2012-02-11
Posts : 39
Re: Jfrzy's 4th Gen Altima Sedan
That looks sick! And I was asking if your going to winter drive the car, not the bumper.
Hydrolikz- TTS VP
- Location : Low To The Ground
Age : 111
Join date : 2009-09-26
Posts : 4272
Re: Jfrzy's 4th Gen Altima Sedan
Oh lmao yeah I'll be winter driving it, it's my only car
jfrzy- TTS Rookie
- Location : Burlington, ON
Age : 35
Join date : 2012-06-05
Posts : 87
Re: Jfrzy's 4th Gen Altima Sedan
looks legit! god i need a better front look =(
jmontenegro- TTS Rookie
- Location : Toronto
Age : 36
Join date : 2012-06-09
Posts : 155
Re: Jfrzy's 4th Gen Altima Sedan
^Front lip FTW
Hydrolikz- TTS VP
- Location : Low To The Ground
Age : 111
Join date : 2009-09-26
Posts : 4272
Re: Jfrzy's 4th Gen Altima Sedan
looks good man, eventually I want the Stillen front Fascia
twista- TTS Rookie
- Location : Toronto
Age : 34
Join date : 2012-10-15
Posts : 95
Page 3 of 4 • 1, 2, 3, 4
Page 3 of 4
Permissions in this forum:
You cannot reply to topics in this forum